Cold Rolled, Flat Wire, Special Shapes & Profiles

With our in-house capability to craft specialized dies and rolls, we can take your concept and turn it into reality. Our engineers will work with you to guarantee proper tooling is developed specifically for your order. State of the art equipment allows us to produce your order in a timely, efficient manner so you can keep your facility operating.

The items below are just a small sampling of what we can do.

Shape & Sizes

  • Flat Wire: ¼” x 1”
  • Triangles: Up to ½”
  • Half Rounds: Up to ¾”
  • Trapezoids: Up to ½”
  • Hexagons: Up to ¾”
  • CBM Wire: 0.098” – 1.00” Cut to length 8” min – 20’ max
  • Ovals & other custom shapes: Please inquire

Tolerances

  • Flat Wire: ± 0.002” thickness, ± 0.005” width
  • CBM Wire: ± 1/16” under 4’. Inquire for tolerances over 4’

Grades

  • Plain Carbon (10xx, 11xx, 12xx, 15xx, 41xx, 521xx, inquire for all other grades)
  • Stainless Steel (Austenitic, Ferritic, Martensitic, inquire for all other alloys)
  • Aluminum – Normally stocked grades
  • Copper – Normally stocked grades

Edge Profiles, Flat Wire:

  • #1 – Inquire
  • #2 – Natural mill
  • #3 – Square edge
  • #4 – Round edge
  • #5 – Approx. square edge by rolling
  • #6 – Square edge by edge rolling

Tempers, Flat Wire:

  • #1 – Hard (90 Rb min)
  • #2 – Half Hard (Rb 70 min to Rb 85 max)
  • #3 – Quarter Hard (Rb 60 to Rb 75 max)
  • #4 – Skin Rolled (Rb 65 max)
  • #5 – Dead Soft (Rb 55 max)

Flat wire oscillated wound coils are produced with an ID of 16-24”, OD of 42” max, with a 6-13” coil face, each weighing 4,000 pounds. If you require smaller weights, please feel free to speak of any of our associates about your requirements.

CBM wire coil diameters are available with a minimum ID of 16-24” ø, maximum OD of 42” ø, with coils weighing 4,000 pounds. Please inquire about smaller coil weights. Cut to length pieces are packaged in 2,000 pound bundles.

With respect to packaging, our attention to detail sets us apart from our competitors. From customized pallets to shrink wrapping final product, we take all appropriate measures to safeguard your order to ensure it arrives in pristine condition.

MLP Specialty Metals

18 Mount Pleasant Road Scottdale, PA 15683

Phone: 724.887.8100
Toll-free: 800.426.1983
Fax: 724.887.7723

Email: info@mlpsteel.com